Table of Contents
Module 2 - Design the Network Structure
Section 3 - Provision Hardware and Media for the WAN
Jones, Jones, & Jones: Solution
1. Which router would you select for the first
office?
-
Using the Cisco Reseller Product Selection Tool, the following products
were selected:
-
Cisco 3620
-
Cisco 3640
-
Cisco 4500
-
Cisco 4700
-
Because of the number and types of ports required for this location and
its expandability, recommend the Cisco 3640 router with plug-in interfaces.
Cisco IOS software will already address any new protocol requirements,
but the plug-in network modules with a high-performance RISC processor
make this the right choice.
2. Which router would you select for offices 2
and 3?
-
Using the Cisco Reseller Product Selection Tool, the following products
were selected:
-
Cisco 3620
-
Cisco 3640
-
Cisco 4500
-
Cisco 4700
-
Recommend the Cisco 3620 router for offices 2 and 3 because fewer WAN ports
are required at these locations.
3. Which routers would you select for the international
offices?
-
Using the Cisco Reseller Product Selection Tool, the following products
were selected:
-
Cisco 1601
-
Cisco 1602
-
Cisco 1603
-
Cisco 1604
-
Cisco 2503
-
Cisco 2516
-
Cisco 2520
-
Cisco 2522
-
Cisco 2524
-
Recommend either the Cisco 2503 or the Cisco 1603 router. Based on the
cost concerns of the customer, we would recommend the Cisco 1603.
4. Update your topology
diagram from Module 2, Section 1, to reflect your media, LAN, and WAN
hardware selections.
Click on the Back button in your browser to review Section 3 of Module
2. If you are finished with that section, click
here to go on to Section 4 of Module 2.
Copyright Cisco Systems, Inc. -- Version 2.0 7/98